Experimental evaluation of hygrothermal degradation of stainless steel fibre metal laminate
نویسندگان
چکیده
منابع مشابه
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملEffect of Thermal Properties on Delaminated Fibre Metal Laminate
An attempt is made to analyse the effect of variation in thermal properties in Fibre Metal Laminate with an implanted delamination. This work focuses to explore the variations in thermal contrast for the increase in values of thermal properties of delamination, Aluminium layers and glass reinforced epoxy layers. The paper projects the numerical investigations towards the thermal analysis of fib...
متن کاملLiquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel in a Molten Zinc Bath
Corrosion tests of 1015 low-carbon steel and two stainless steels (410 and 316L) were conducted in a pure zinc bath (99.98 wt pct Zn) in order to better understand the reaction mechanisms that occur during the degradation of submerged hardware at industrial general (batch) galvanizing operations. Through this testing, it was found that, in general, 316L stainless steel showed the best dissoluti...
متن کاملCrystallography of Widmanstätten austenite in duplex stainless steel weld metal
Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmanstätten plates and allotriomorphs which precipitate at d–d grain boundaries. It is found using microtexture measurements that the preferred crystallographic orientation of the Widmanstätten austenite can be estimated using established theory if it is assumed that there i...
متن کاملExperimental Investigations on Stretchability of an Austentic Stainless Steel 316L
The purpose of this investigation is to examine the viability of using the sheet metal for forming applications. Forming limit diagram (FLD) composed of negative and positive minor strain with respect to major strain which occurs at directional zero strain with the critical thickness of sheet metal. The negative minor strain region of FLD is predicted by localized necking. However there is no d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Science and Technology, an International Journal
سال: 2018
ISSN: 2215-0986
DOI: 10.1016/j.jestch.2018.01.002