Experimental evaluation of effective stress intensity factor using thermoelastic stress analysis and digital image correlation
نویسندگان
چکیده
منابع مشابه
Evaluation of Mixed-Mode Stress Intensity Factor by Digital Image Correlation and Intelligent Hybrid Method
Displacement measurement was conducted on compact normal and shear specimens made of acrylic homogeneous material subjected to mixed-mode loading by digital image correlation. The intelligent hybrid method proposed by Nishioka et al. was applied to the stress-strain analysis near the crack tip. The accuracy of stress-intensity factor at the free surface was discussed from the viewpoint of both ...
متن کاملApplication of digital image correlation to address complex motions in thermoelastic stress analysis
A motion compensation method for thermoelastic stress analysis (TSA) is described that uses digital image correlation (DIC) to capture the displacement field on the surface of the specimen. The displacement field is used to correct the infrared (IR) images to remove the effect of the motion of the specimen from the TSA. As the DIC displacements are obtained with a relatively high spatial resolu...
متن کاملStress intensity factor measurements from digital image correlation: post-processing and integrated approaches
Digital image correlation is an appealing technique for studying crack propagation in brittle materials such as ceramics. A case study is discussed where the crack geometry, and the crack opening displacement are evaluated from image correlation by following two different measurement and identification routes. The displacement uncertainty can reach the nanometer range even though optical pictur...
متن کاملStress Field Analysis of V-Notches with Tip Cracks in a Polymer Material Using Digital Image Correlation
In this study, displacement field around v-notches of a poly methyl metha crylate (PMMA) specimen with tip cracks will be analyzed using digital image correlation technique. First intensity factor in combination with in-plane rigid body translations and rotation components will be determined by linear least squares fitting of the displacement field data to the corresponding relations among stre...
متن کاملStress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method
This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack. It is assumed that the cracks are located radially at center, internal or external radius of the geometry. Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Fatigue
سال: 2020
ISSN: 0142-1123
DOI: 10.1016/j.ijfatigue.2020.105567