Experimental demonstration of an end-burning swirling flow hybrid rocket engine
نویسندگان
چکیده
منابع مشابه
An Experimental Study of Swirling Flow Pneumatic
conveying velocity, pipe wear, and particle degradation. An experimental study has Yuji Tomita addressed the characteristics of swirling flow pneumatic conveying (SFPC) for the Professor, total pressure drop, solid flow patterns, power consumption, and additional pressure Department of Mechanical Engineering, drop. Polystyrene, polyethylene, and polyvinyl particles with mean diameters of 1.7, K...
متن کاملInvestigation of Swirling and Tumbling Flow Pattern of Spark Ignition Engine
Gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. It also has significant impact on heat transfer. Both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. An arrangement for obtaining a stratified charge, using port injection, is proposed for a ...
متن کاملThe Blacklight Rocket Engine
Executive Summary This report summarizes the final project results for the period of May 1, 2002 through November 30, 2002 for the NIAC CP 01-02 Phase I study, "The BlackLight Rocket Engine". The objective of the Phase I study was to assess the potential of low pressure, mixed gas hydrogen plasmas (i.e. the BlackLight Process) toward the development of high performance space propulsion systems.
متن کاملHybrid Rocket Technology: An Overview
Introduction In hybrid rocket motors, one of the two propellants (oxidizer or fuel) is in liquid phase and the other is in solid phase. The combination of a solid fuel and a liquid oxidizer is the most common one, Fig. 1. 1 Even though the idea of hybrid rocket motor was conceived as early as 1937, it was only after 1960s they were built successfully with good combustion efficiency. A discussio...
متن کاملExperimental Studies on Swirling Flow in a Vertical Circular Tube
Swirling flows are related to the spiral motion in the tangential direction in addition to the axial and radial direction using several swirl generators. These type of flows are used in combustion chambers to improve flame stability, heat exchanger to enhance heat transfer coefficients, agricultural spraying machines and some vertical pipes to move slurries or transport of materials. However, o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Aerospace Science and Technology
سال: 2019
ISSN: 1270-9638
DOI: 10.1016/j.ast.2019.05.057