Experimental characterization and numerical modeling of crack initiation in rhombus hole PMMA specimens under compression
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملPrediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملA numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کاملCharacterization of crack-tip field and constraint for bending specimens under large-scale yielding
Elastic-plastic crack-tip fields and constraint levels in bending specimens under large-scale yielding (LSY) are examined. The J − A2 three-term solution is modified by introducing an additional term caused by the global bending. Three different methods, i.e. two-point matching, constant A2 and elastic stress estimation method, are proposed to determine the fourth term. It is shown that the ela...
متن کاملA Plasticity Criterion for Mixed Mode Fracture Initiation with Crack Surface Frictional Characteristics Under Compression
A new plasticity criterion for mixed mode crack initiation angles under compression is presented, based on the characteristics of the plastic core region surrounding the crack tip with crack surface friction. The shape and size of the plastic core region were thoroughly analyzed under compression and the non-dimensional variable radius of the plastic core region for mixed mode compressive fract...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: European Journal of Mechanics - A/Solids
سال: 2019
ISSN: 0997-7538
DOI: 10.1016/j.euromechsol.2019.04.013