Experimental Characterisation of the Bainitic Transformation Kinetics of Residual Austenite in Mn-Si TRIP-Assisted Multiphase Steels

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Characterisation of the Bainitic Transformation Kinetics of Residual Austenite in Mn-Si TRIP-Assisted Multiphase Steels

Recent studies on TRIP-assisted multiphase steels have emphasised the drastic importance of the bainitic transformation in the optimisation of properties. Bainitic ageing is necessary for the stabilisation of austenite with respect to the martensitic transformation. This metastable retained austenite can still transform to martensite when plastically deformed (TRIP effect). The present work dea...

متن کامل

THE EFFECT OF STRAINING BEFORE AND DURING AUSTENITE TO FERRITE TRANSFORMATION ON THE FINAL CHARACTERISTICS OF SI-MN TRIP STEELS

TRIP (TRansformation- lnduced- Plasticity) behavior is a powerful mechanism to improve mechanical properties. The basis of TRIP phenomena is the transformation of retained austenite with optimum characteristics (volume fraction, stability, size and morphology) to martensite during deformation at room temperature. Accordingly, the first requirement to obtain desired TRIP effects is to produce an...

متن کامل

ULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS

Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...

متن کامل

Strong Bainitic Steels by Continuous Cooling Transformation

Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...

متن کامل

Stress-Assisted Isothermal Martensitic Transformation Application to TRIP Steels

Low-temperature plastic flow in TRIP steels has been found to be controlled by stress-assisted isothermal martensitic transformation. For these conditions, the thermodynamics and kinetic theory of martensitic transformations leads directly to constitutive relations predicting the dependence of flow stress on temperature, strain, strain-rate, and stress-state, consistent with the observed behavi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Le Journal de Physique IV

سال: 1997

ISSN: 1155-4339

DOI: 10.1051/jp4:1997573