Experimental characterisation and prediction of shielding effectiveness for multilayer carbon fibre reinforced composite materials with varying configurations

Machining of Fibre Reinforced Plastic Composite Materials

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...

Carbon Nanotube Reinforced Alumina Composite Materials

Fatigue Damage Modelling of Fibre-reinforced Composite Materials: Review

This paper presents a review of the major fatigue models and life time prediction methodologies for fibrereinforced polymer composites, subjected to fatigue loadings. In this review, the fatigue models have been classified in three major categories: fatigue life models, which do not take into account the actual degradation mechanisms but use S-N curves or Goodman-type diagrams and introduce som...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Experimental Investigation on Fibre Reinforced Concrete Using Waste Materials

Advancements in technology enhances not only human comforts but also damages the environment. Use of metals as containers has become popular and safe now, especially to carry the liquids. Inspite of the inherent advantages and disadvantages existent in its disposal. Today the construction industry is in need of finding cost effective materials for increasing the strength of concrete structures....