Experimental Assessment of Rebar Corrosion in Concrete Slab Using Ground Penetrating Radar (GPR)

Automated Rebar Detection for Ground-Penetrating Radar

Automated rebar detection in images from groundpenetrating radar (GPR) is a challenging problem and difficult to perform in real-time as a result of relatively low contrast images and the size of the images. This paper presents a rebar localization algorithm, which can accurately locate the pixel locations of rebar within a GPR scan image. The proposed algorithm uses image classification and st...

GPR (Ground Penetrating Radar) into Real World

GPR (Ground Penetrating Radar) is one of subsurface sensing technologies, which has been used intensively since 1980s. Due to rapid development of both hardware and software, its possibilities have been considerably extended resulting in widening the area of its applications. While such applications as to detection of buried pipes and cables, archaeology and geology are established category, ne...

Correlation-based Model for Evaluating Ground Penetrating Radar (gpr) Data of Concrete Bridge Decks

The Ground Penetrating Radar (GPR) has been studied for a long time as a non-destructive evaluation (NDE) technology for inspection of concrete structures. Currently, the most widely used technique for interpreting GPR data of concrete bridge decks is the one that based on the amplitudes measured at various interfaces such as asphalt-concrete, top rebar, or slab bottom. The assumption behind th...

Ground Penetrating Radar Method & IDS RIS Structure GPR Systems

Boric Acid Corrosion of Concrete Rebar

Borated water leakage through spent fuel pools (SFPs) at pressurized water reactors is a concern because it could cause corrosion of reinforcement steel in the concrete structure and compromise the integrity of the structure. Because corrosion rate of carbon steel in concrete in the presence of boric acid is lacking in published literature and available data are equivocal on the effect of boric...