Experimental and Theoretical Investigation of Water Jet Pump Performance
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Experimental Investigation of Performance Modification of Centrifugal Pump
Major industrial sector are using, most pumps are of centrifugal type. Centrifugal pumps are widely used because of their design simplicity, high efficiency & low maintenance. Modern centrifugal pumps are not complex machines. Despite the simplicity of design and production, centrifugal pumps are still capable of posing complex puzzles during their operation. The performance of a pump must be m...
متن کاملExperimental Investigation on the Influence of Refrigerant Charge on the Performance of Trans-critical CO2 Water-Water Heat Pump
For the environmentally aware, natural refrigerant such as CO2 is recommended and pursued by researchers for refrigerators. In this paper, a transcritical CO2 heat pump system was set up to investigate the influence of refrigerant charge on the performance of a small-sized heat pump water heater. The transcritical CO2 heat pump system was composed of a rotary compressor, a tube-in-tube evaporat...
متن کاملGasification of potato shoots: An experimental and theoretical investigation
A thermodynamic equilibrium model was developed to predict the gasification process in a bench-scale fluidized bed gasifier. Potato shoot (leaves and stems) was used as the feedstock of the gasifier. The experiments were done in five different gasification zone temperatures (650, 700, 750, 800 and 850°C), with a feeding rate of 0.166 kg/hour, and two equivalence ratios (ER: 0.2 and 0.25). T...
متن کاملAn Experimental Investigation into the Effects of High Viscosity and Foamy Oil Rheology on a Centrifugal Pump Performance
This paper presents the effect of high viscosity oil and two-phase foamy-oil flow on the performance of a single stage centrifugal pump. As a part of this, the applicability of a pipe viscometer to determine the foamy oil viscosity is investigated. Unlike previous studies, a sealed fluid tank is used in a closed flow loop to allow conditioning the two-phase mixture to create foamy-oil. Furtherm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Energy Systems
سال: 2021
ISSN: 2636-3720
DOI: 10.21608/ijaes.2021.169900