Experimental and Numerical Study of Water Entry Supercavity Influenced by Turbulent Drag-Reducing Additives
نویسندگان
چکیده
منابع مشابه
Drag reduction by polymer additives from turbulent spectra.
We extend the analysis of the friction factor for turbulent pipe flow reported by G. Gioia and P. Chakraborty [Phys. Rev. Lett. 96, 044502 (2006)] to the case where drag is reduced by polymer additives.
متن کاملTurbulent Drag Reduction by Spanwise Wall Oscillations
The objective of this paper is to examine the effectiveness of wall oscillation as a control scheme of drag reduction. Two flow configurations are considered: constant flow rate and constant mean pressure gradient. The Navier-Stokes equations are solved using Fourier-Chebyshev spectral methods and the oscillation in sinusoidal form is enforced on the walls through boundary conditions for the sp...
متن کاملA Role of Elastic Energy in Turbulent Drag Reduction by Polymer Additives
In the present study, the mechanism of turbulent drag reduction by polymer additives in a fully developed channel ow is investigated using direct numerical simulation. In order to see the elastic e ect on turbulent drag reduction, the dilute polymer solution is expressed with an Oldroyd-B model which shows a linear elastic behavior. Simulations are carried out by changing the Weissenberg number...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Drag reduction in a flat-plate turbulent boundary layer flow by polymer additives
This paper presents a theoretical study on the velocity distribution and the friction factor of boundary layer flows with polymer additives starting from the concept of “stress deficit.” A novel method of order of magnitude analysis is developed, which converts the governing equations of boundary layer flow into a solvable ordinary differential equation, thus the total shear stress distribution...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2014
ISSN: 1687-8140,1687-8140
DOI: 10.1155/2014/280643