Experimental and numerical study of deposition mechanisms for cold spray additive manufacturing process
نویسندگان
چکیده
منابع مشابه
Process Planning for Shape Deposition Manufacturing
Solid Freeform Fabrication (SFF) refers to a class of rapid manufacturing process that builds parts by incremental material deposition and fusion of thin 2-1/2 dimensional layers. Over this past decade, SFF has taken the manufacturing industry to new heights. However, parts produced by SFF processes exhibit a stair-step surface texture due to the presence of 2-1/2 dimensional layers and exhibit...
متن کاملLaser Additive Manufacturing Process Planning and Automation
This paper presents a Laser Additive Manufacturing Process Planning (LAMPP) being developed at the University of Missouri-Rolla. The off-line planning recognizes difficult-to-build features from an STL file, selects optimal part orientation and building directions based on the skeleton information of the object geometry, and optimizes the sub-process sequences for deposition and machining. Duri...
متن کاملNumerical Investigations on Hatching Process Strategies for Powder Bed Based Additive Manufacturing using an Electron Beam
This paper extends 3D simulation results of layer hatching process strategies for additive manufacturing by electron beam melting (EBM) applications to exploit the future energy potential of electron guns with higher beam power. The physical model, discretized by a three dimensional thermal lattice Boltzmann method, is briefly presented. The numerical implementation is validated on the basis of...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Innovative Process Model of Ti-6al-4v Additive Layer Manufacturing Using Cold Metal Transfer (cmt)
New approaches to modern manufacture have emerged from Additive Layer Manufacturing (ALM) technologies over the last 25 years. These approaches provide form, fit and function to a wide range of metallic alloys and components. Wire + Arc Additive Layer Manufacture (WAALM) has gained the interest of the research community in recent years due to its high deposition rate and efficiency (100%). The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Aeronautics
سال: 2021
ISSN: 1000-9361
DOI: 10.1016/j.cja.2021.02.002