Experimental and numerical investigations of glass curtain walls subjected to low- level blast loads

Performance of Polymer-encased Concrete Walls Subjected to Blast Loads

Blast Analysis of Laminated Glass Curtain Walls Equipped

Nonlinear numerical simulations are reported for a conventional unitized laminated glass curtain wall subjected to highand low-level air blast loading. The studied curtain wall, spanning floor to floor, consisted of a laminated glass panel, a continuous bead of structural silicone sealant, a split screw spline frame and four rigid brackets. Firstly, a linear elastic FE-model (M01) is presented ...

Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading

Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...

Passive Control Systems for the Blast Enhancement of Glazing Curtain Walls Under Explosive Loads

Glass curtain walls are used in modern buildings as envelopes for wide surfaces due to a multitude of aspects. In glass curtain walls, tensile brittle panels are connected through mechanical or adhesive joints with steel frameworks or aluminum bracing systems, and due to the interaction of several structural components, the behaviour of the so assembled system is complex to predict, especially ...

Experimental and Numerical Investigations of Textile Hybrid Composites Subjected to Low Velocity Impact Loadings

In the present study experimental and numerical investigations were carried out to predict the low velocity impact response of four symmetric configurations: 10 ply E Glass, 10 ply AS4 Carbon, and two Hybrid combinations with 1 and 2 outer plies of E Glass and 8 and 6 inner plies of Carbon. All numerical investigations were performed using commercial finite element software, LS-DYNA. The test c...