Experimental and numerical investigations of axially loaded RC walls restrained on three sides
نویسندگان
چکیده
منابع مشابه
Non-rectangular Rc Walls: a Review on Experimental Investigations
When compared to tests on reinforced concrete (RC) walls with a rectangular or barbelled crosssection, only very few tests on RC walls with open cross-section exist. Most of these walls were subjected to unidirectional or bidirectional loading along one or both of the principal axes of the wall section. It was rare that tests were done using load paths that did not follow the principal axes. Th...
متن کاملExperimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge
Up to now, a few formulas have been suggested by scholars for the amount of discharge from openings, however, the effect of opening's geometry on the amount of discharge has not addressed thoroughly. In this study, to assess the effect of rectangular openings’ aspect ratio on the discharge amount, experimental and numerical investigations have been conducted on the discharge amount from rectang...
متن کاملStructural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls
composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...
متن کامل3D strain map of axially loaded mouse tibia: a numerical analysis validated by experimental measurements.
A combined experimental/numerical study was performed to calculate the 3D octahedral shear strain map in a mouse tibia loaded axially. This study is motivated by the fact that the bone remodelling analysis, in this in vivo mouse model should be performed at the zone of highest mechanical stimulus to maximise the measured effects. Accordingly, it is proposed that quantification of bone remodelli...
متن کاملNumerical and Experimental Investigations on Springback of U-bending of DP600 Steel Alloy Sheet
The most prominent feature of sheet material forming process is an elastic recovery phenomenon during unloading which leads to springback and side wall curl. Therefore evaluation of springback and side wall curl is mandatory for production of precise products. In this paper, the effects of some parameters such as friction coefficient, sheet thickness, yield strength of sheet and blank-holder fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Structural Design of Tall and Special Buildings
سال: 2018
ISSN: 1541-7794
DOI: 10.1002/tal.1459