Experimental and Numerical Investigation of Fluid Flow and Heat Transfer in Circular Micro-Channel

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Investigation of Low Flow Rate, Low Pressure Drop and Heat Transfer in Micro-Channel

The objective of the current experimental program is to generate data for liquid flow through micro-channels. The channel dimensions are 0.9 mm deep x 0.5 mm width. Rectangular seven micro-channels each of 70 mm long were cut on a stainless steel substrate (100 mm x 100 mm x 10 mm) by Electro Discharge Machining (EDM) technique. Covering the top with another plate formed the channels. The liqui...

متن کامل

numerical investigation of heat transfer in circular perforated plates exposed to parallel flow and suction

unglazed transpired solar collectors are widely used for heating outside air directly, these days. pre-heating ventilation air for large spaces and heating air for crop drying, are some of the applications of these kinds of collectors. the outside air is drawn straight from ambient, uniformly through the whole surface of a perforated absorber (transpired, dark-colored plate) exposed to the sun....

متن کامل

Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

متن کامل

Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

متن کامل

Numerical study of fluid flow and heat transfer in a gas-tank water heater

Influence of a vent hood at the exit of exhaust flue gas and flue baffles in the firetube on the temperature and flow fields of a gas tank water heater, as well as thestructure and amount of heat transferred to the water tank has been studiednumerically using two-dimensional steady state finite element simulation.Observations show that without a vent hood, there is a downward gas flow in theflu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Sains Malaysiana

سال: 2020

ISSN: 0126-6039

DOI: 10.17576/jsm-2020-4910-25