Experimental and numerical investigation of densification behaviors during powder compaction
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملNumerical and Experimental Investigation of Yielding for Cohesive Dry Powder
We study the effect of particle cohesion on the steady state shear strength of a granular material. For cohesive powders, the steady state shear loci (termination loci) from DEM simulations are nonlinear with a peculiar pressure dependence due to the non-linear increase of contact adhesion with pressure in the contact model. Physical experiments are carried out on fine limestone powder in the d...
متن کاملNumerical Simulation on Pharmaceutical Powder Compaction
In this paper, we present a modified density-dependent Drucker-Prager Cap (DPC) model with a nonlinear elasticity law developed to describe the compaction behavior of pharmaceutical powders. The model is implemented in ABAQUS with a user subroutine. Using microcrystalline cellulose (MCC) Avicel PH101 as an example, the modified DPC model is calibrated and used for finite element simulations of ...
متن کاملEvaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure
The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2018
ISSN: 1881-3054
DOI: 10.1299/jamdsm.2018jamdsm0022