Experimental and Numerical Analyses of Flexible Forming Process for Micro Channel Arrays of Fuel Cell Bipolar Plates
نویسندگان
چکیده
منابع مشابه
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process
Micro-stamping process is one of the most cost-effective methods to manufacture metallic bipolar plates (BPPs). This research investigates the forming of titanium thin sheet as a potential candidate for BPPs in proton exchange membrane fuel cell (PEMFC). In this regard, the process was first simulated using finite element (FE) code Abaqus. Afterward, experimental tests were implemented and the ...
متن کاملNumerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming
The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...
متن کاملnumerical and experimental evaluation of forming limit in hydrodynamic forming process for spherical end samples
0
متن کاملTheoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries
This study explored the free vibration problem in relation to glass fiber reinforced polymer (GFRP) plates with central cutouts and free boundaries using theoretical, experimental, and numerical methods. The theoretical formulations were derived from the classical lamination plate theory. The rectangular cutout was mathematically modeled into the stiffness matrix of the plate by multiplying Hea...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of Materials Processing
سال: 2012
ISSN: 1225-696X
DOI: 10.5228/kstp.2012.21.8.499