Experimental and finite element optimization analysis on hydroforming process of rupture disc

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analytical and Finite Element Analysis of Hydroforming Deep Drawing Process

This paper gives an overview of a deep drawing process by pressurized liquid medium separated from the sheet by a rubber diaphragm. Hydroforming deep drawing processing of sheet metal parts provides a number of advantages over conventional techniques. It generally increases the depth to diameter ratio possible in cup drawing and minimizes the thickness variation of the drawn cup. To explore the...

متن کامل

Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method

In ultrasonic tube hydroforming, the tube is hydro formed while the ultrasonic vibration is applied to the die. Prior studies provide experimental proof that ultrasonic tube hydroforming reduces corner radius, improves lubrication and uniform thickness. Use of ultrasonic vibration can decrease friction at the tube-die interface. Few attempts have been made to analyze the wire drawing while the ...

متن کامل

Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L

One of the bellows producing method is hydroforming process .Whereas some factor of hydroforming process specially internal pressure affects on final characteristics produced bellows such as bursting, wrinkling and wall thickness distribution. In this paper the effect of internal pressure factor in final quality of produced bellows will be investigated. In simulation of process, ABAQUS/Explicit...

متن کامل

Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L

One of the bellows producing method is hydroforming process .Whereas some factor of hydroforming process specially internal pressure affects on final characteristics produced bellows such as bursting, wrinkling and wall thickness distribution. In this paper the effect of internal pressure factor in final quality of produced bellows will be investigated. In simulation of process, ABAQUS/Explicit...

متن کامل

Evaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method

Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is  employed. However, limi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia Manufacturing

سال: 2018

ISSN: 2351-9789

DOI: 10.1016/j.promfg.2018.07.408