Experimental and computer simulation results of the spot welding process using SORPAS software
نویسندگان
چکیده
منابع مشابه
Resistance Spot Welding of Steels: Modeling and Simulation
Resistance spot welding (RSW) includes many variables that can influence the weld properties. The purpose of this study is to develop an analytical model for prediction of thermal history and weld microstructure in RSW and to find the most important process parameters that influence the weld microstructure. A one dimensional model is proposed for prediction about thermal history during cooling ...
متن کاملAnalysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملFinite element simulation of laser spot welding
The present work reports on a two-dimensional axisymmetric nite element analysis of heat ow during laser spot welding, taking into account the temperature dependence of the physical properties and latent heat of transformations. An analysis based on conduction heat transfer alone, but using the ‘double ellipsoidal’ representation of the laser beam, seems to be suf cient to estimate the tra...
متن کاملBehavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results
In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...
متن کاملBehavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results
In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2009
ISSN: 1742-6596
DOI: 10.1088/1742-6596/178/1/012045