EXPERIMENTAL AND ANALYTICAL STUDIES FOR PREVENTION OF GALVANIZING CRACKS DURING HOT DIP GALVANIZING OF STEEL STRUCTURES

Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products

REACTION KINETICS OF THE FORMATION OF INTERMETALLIC Fe – Zn DURING HOT - DIP GALVANIZING OF STEEL

P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic This review article mainly describes the composition of intermetallic Fe Zn, i.e. zeta (ζ), delta (δ1k + δ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detail...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Some Applications of Neural Networks for Condition Monitoring in Industrial Systems for Hot Dip Zinc Galvanizing

The paper describes the abilities of some particular neural network structures (NNS) to provide condition monitoring in a real industrial system, designated for hot dip zinc galvanizing. Condition assessment of a molten zinc bath furnace, and more specifically analysis and prediction of the technical condition in galvanizing kettle walls are also developed in this paper.

Characterization and Prediction of Cracks in Coated Materials: Direction and Length of Crack Propagation in Bimaterials

The behaviour of materials is governed by the surrounding environment. The contact area between the material and the surrounding environment is the likely spot where different forms of degradation, particularly rust, may be generated. A rust prevention treatment, like bluing, inhibitors, humidity control, coatings, and galvanization, will be necessary. The galvanization process aims to protect ...