Experimental analysis of process parameters in drilling nimonic C263 alloy under nano fluid mixed MQL environment
نویسندگان
چکیده
منابع مشابه
Optimization of Process Parameters based on Surface Roughness and Cutting Force in MQL Turning of AISI 4340 using Nano Fluid
The aim of this research work is focused on optimization of process parameters under Minimum Quantity Lubrication (MQL) using nano fluid in turning of AISI 4340. A study of effect of process parameters in turning of AISI 4340 under MQL condition with nano fluid (Multiwalled Carbon Nano Tube) on the cutting force generated and machined surface roughness is carried out. In the experiment conducte...
متن کاملExperimental Study in the Process Parameters in Laser Percussion Drilling
In order to service and grow in the present day of global competition, every manufacturing concern focuses mostly on two factors i.e. productivity and quality. Laser drilling is a popular non-traditional machining technique for producing large numbers of cooling holes of various sizes (less than mm diameter) and angles in modern aerotech components such as turbine blades, injector nozzles, and ...
متن کاملApplication of Nano-Particles of Clay to Improve Drilling Fluid
Drilling fluids are an essential component of the rotary drilling process used to drill for oil and gas on land and offshore environments. The injection of this nano particle into drilling fluid increases the viscosity levels fluids. In these experiments, the rheological properties of the fluid including apparent viscosity (AV), plastic viscosity (PV), yielding point (YP), mud c...
متن کاملCorrosion Behaviour of NIMONIC-90 Alloy
Investigations were conducted on hot corrosion of Nickel base, NIMONIC-90 at 675°C and 725°C. The tests were carried out on small test coupons coated with a chemical containing Sodium sulphate and Sodium Vanadate which is representative of the corrosive deposit that usually forms during service in the coal fired boiler and the likes operating in marine atmospheres. Corrosion rates were measured...
متن کاملStudy the Effects of Nano Fluid as a Coolant in Milling Process for Improving Machining Parameters
The aim of this research work is to evaluate the effects of coolant including nano- powder material for the cooling purpose in milling process and comparing the results with the conventional coolant. Generation heat and weak heat transfer reduces the tool life and also deteriorate surface roughness during milling operation. To overcome this problem, it is necessary to use coolant for cooling as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Review
سال: 2021
ISSN: 2265-4224
DOI: 10.1051/mfreview/2020039