Experimental Analysis of Polycaprolactone High-Resolution Fused Deposition Manufacturing-Based Electric Field-Driven Jet Deposition

نویسندگان

چکیده

Polycaprolactone (PCL) scaffolds have been widely used in biological manufacturing engineering. With the expansion of PCL application field, manufacture high-resolution complex microstructure is becoming a technical challenge. In this paper, novel fused deposition 3D printing based on electric field-driven (EFD) jet proposed to porous scaffold structures. The process principle continuous cone-jet mode was analyzed, and an experimental system constructed field driven carry out experiments. studies PCL-fused under different gas pressures, voltages, motion velocities heights were carried out. Analysis results shows that there effective range height (H) realize stable when applied voltage constant. Under stretching force viscous drag (FD) with increasing movement (Vs) at same height, width lines also gradually decreased. line velocity platform approximately quadratic curve. bending phenomenon decreases increase velocities. According experiment results, single layer linear grid structure printed appropriate parameters, compact structure, uniform size good straightness. verify can be accurately manufactured.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Curved Layer Fused Deposition Modeling

Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...

متن کامل

experimental investigation of surface roughness for fused deposition modelled part with different angular orientation

fused deposition modeling (fdm) is a filament based rapid prototyping system provides us to manufacture real parts with multiple production-grade materials, such as abs-m30, pc, ppsf and pc-abs blend. fused deposition modeling technology, essentially perform using layer manufacturing process. more complex 3d physical models can be efficiently fabricated without geometric limitation by this tech...

متن کامل

Shape Deposition Manufacturing

Solid Freeform Fabrication (SFF) processes " rapidly " create three dimensional shapes of arbitrary complex geometries by incremental material deposition of 2 1 / 2 dimensional layers. Automated planning and execution of the fabrication process is possible, and the need for part-specific tooling or fixturing is eliminated. However, there are inherent limitations in the resulting surface quality...

متن کامل

Robot-Assisted Shape Deposition Manufacturing

Solid Freeform Fabrication and Shape Deposition are rapid manufacturing processes which build parts by incrcmental material deposition and fusion of crosssectional layers. In Lhis paper, several thermal deposition processes are described for directly fabricating prototype metal shapes using robotically manipulated material deposition systems. A robotic palletizing/part transfer systcm is also d...

متن کامل

Anti-aliasing for fused filament deposition

Layered manufacturing inherently suffers from staircase defects along surfaces that are gently slopped with respect to the build direction. Reducing the slice thickness improves the situation but never resolves it completely as flat layers remain a poor approximation of the true surface in these regions. In addition, reducing the slice thickness largely increases the print time. In this work we...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Crystals

سال: 2022

ISSN: ['2073-4352']

DOI: https://doi.org/10.3390/cryst12111660