Experimental analysis of bonded single lap joint with flexible adhesive
نویسندگان
چکیده
منابع مشابه
Analysis of adhesive-bonded single-lap joint with an interfacial crack and a void
void within the adhesive. Depending upon the number of notches and voids, the specimen is divided into several regions. Assuming that a plane strain state of deformation prevails in the specimen, we write the balance of forces and moments for each section and impose the continuity of displacements, forces and moments at the interfaces between the adjoining sections. By taking the Laplace transf...
متن کاملThe Fuzzy Finite Element Stress Analysis of Adhesive-Bonded Single Lap Joints
An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...
متن کاملSemi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملEffect of Adherend Shape on Stress Concentration Reduction of Adhesively Bonded Single Lap Joint
Article history: Received: 03.10.2014. Received in revised form: 19.12.2014. Accepted: 30.12.2014. In this work, the effect of adherend shape on the tensile strength of adhesively bonded single lap aluminum structures joint was numerically studied using three dimensional finite element models. Six joint models were investigated. In this paper, a static finite element analysis was performed in A...
متن کاملEvaluation of Fatigue Damage in Adhesive Bonding: Part 2: Single lap joint
Damage parameters for crack initiation in Single Lap Joint (SLJ) are determined by combining continuum damage mechanics, Finite Element Analysis (FEA) and fatigue experimental data. Even tough SLJ has a simple configuration; the stresses in the adhesive region are quite complex and exhibit a multi-axial state. Such a condition leads to the need to introduce a general value of triaxiality functi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Adhesion Science
سال: 2014
ISSN: 2196-4351
DOI: 10.1186/2196-4351-2-1