Expansion of Metallic Cylinders under Explosive Loading
نویسندگان
چکیده
منابع مشابه
Expansion and fracture of AISI 1045 steel explosive-filled cylinders
By a improved front light-source framing photography technique and a simple fragments soft recovered method, the expansion and fracture behaviour of the AISI 1045 steel cylinders loaded by three different brisance explosives have been studied . Cylinders were heat treated-normalized and quenched and tempered. Experimental results show that the more intensive of the loading ,the stronger capabil...
متن کاملPeridynamic modeling of composite laminates under explosive loading
High velocity impact and shock or blast responses are a critical design characteristic determining sizing of composite parts and, ultimately, weight savings. This study demonstrates the applicability of peridynamics to accurately predict nonlinear transient deformation and damage behavior of composites under shock or blast types of loadings due to explosions. The peridynamic predictions correla...
متن کاملA General Form Solution for Elastic Buckling of Thin Cylinders Made of FGM under Axial Loading
In this article, the axisymmetric mechanical buckling of thin cylindrical shell made of functionally graded material (FGM) is considered. The governing equations for a thin cylinder based on the first-order shell theory and Timoshenko's assumptions are obtained. The equations are derived using the Sanders simplified kinematic relations and the principle of work and energy. The constituent mater...
متن کاملPerformance of metallic honeycomb-core sandwich beams under shock loading
Stainless steel square honeycomb core sandwich and solid monolithic beams have been subjected to high-pressure, short-duration impulses using a shock simulation technique involving high-speed impact of Al foam projectiles. The experiments have been designed to achieve two objectives: (i) to demonstrate the benefits of sandwich construction, and (ii) to assess the fidelity of dynamic finite elem...
متن کاملPlastic Behavior of Metallic Damping Materials under Cyclical Shear Loading
Metallic shear panel dampers (SPDs) have been widely adopted in seismic engineering. In this study, axial and torsional specimens of four types of metallic damping materials, including three conventional metallic steels as well as low yield strength steel 160 (LYS160), were tested in order to investigate the material response under repeated large plastic strain and low cycle fatigue between 10 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Defence Science Journal
سال: 1992
ISSN: 0976-464X,0011-748X
DOI: 10.14429/dsj.42.4375