Expansion of Electric Furnace Reducing Slag and Its Stabilization.
نویسندگان
چکیده
منابع مشابه
The Phase Composition of Electric Furnace Slag
Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملGround Granulated Blast Furnace Slag
1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...
متن کاملFatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag
This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملFoamy Slag Fundamentals and their Practical Application to Electric Furnace Steelmaking
This paper will define the slag compositions required to obtain and control optimum foamy slag conditions in the Electric Furnace. In defining the optimal slags, consideration is given to the effects of scrap quality, carbon injection, slag basicity and MgO content. A computer model based on published phase-diagrams has been developed which graphically maps the chemistries for optimal foaming c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1991
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.40.1545