Expansion and fracture of AISI 1045 steel explosive-filled cylinders
نویسندگان
چکیده
منابع مشابه
Expansion and fracture of AISI 1045 steel explosive-filled cylinders
By a improved front light-source framing photography technique and a simple fragments soft recovered method, the expansion and fracture behaviour of the AISI 1045 steel cylinders loaded by three different brisance explosives have been studied . Cylinders were heat treated-normalized and quenched and tempered. Experimental results show that the more intensive of the loading ,the stronger capabil...
متن کاملMechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels
In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...
متن کاملExperimental Design and Data collection of a finishing end milling operation of AISI 1045 steel
In this Data in Brief paper, a central composite experimental design was planned to collect the surface roughness of an end milling operation of AISI 1045 steel. The surface roughness values are supposed to suffer some kind of variation due to the action of several factors. The main objective here was to present a multivariate experimental design and data collection including control factors, n...
متن کاملFinite Element Method Simulation of Machining of AISI 1045 Steel With A Round Edge Cutting Tool
In this paper, FEM modeling and simulation of orthogonal cutting of AISI 1045 steel is studied by using dynamics explicit Arbirary Lagrangian Eulerian method. The simulation model utilizes the advantages offered by ALE method in simulating plastic flow around the round edge of the cutting tool and eliminates the need for chip separation criteria. JohnsonCook work material model is used for elas...
متن کاملDuplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer
In this Study, surface of medium carbon steel (AISI 1045) was modified by titanizing followed by plasma nitriding. Titanizing was performed using pack cementation method, in a pack mixture of ferrotitanium, ammonium chloride and alumina, at 1223 K for 45 and 180 min. Plasma-nitriding was conducted at two temperatures of 803 and 823 K for 5 h, in a gas mixture of 75%N2+25%H2. The samples were c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Le Journal de Physique IV
سال: 1994
ISSN: 1155-4339
DOI: 10.1051/jp4:1994864