Expanded Microchannel Heat Exchanger: Nondestructive Evaluation
نویسندگان
چکیده
منابع مشابه
Expanded Microchannel Heat Exchanger: Design, Fabrication and Preliminary Experimental Test
This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for poten...
متن کاملNondestructive Evaluation Techniques for Silicon Carbide Heat-Exchanger Tubing
The adequacy of various nondestructive evaluation (NDE) techniques for inspecting silicon carbide heat-exchanger tubing is discussed .. These methods include conventional ultrasonics, acoustic microscopy, conventional and dye-enhanced radiography, holographic interferometry and infrared scanning techniques. On the basis of current test results and an examination of the discussions in available ...
متن کاملEvaluation of extracorporeal blood heat exchanger devices.
An accurate and easy to use test circuit has been developed for the performance evaluation of the heat exchangers used in cardiac surgery during extracorporeal circulation. The water part of the heat exchanger is fixed at a flow rate of 15 l/min and at a temperature of 40 degrees C. In the blood side, the flow rate is varied from 1 to 6 l/min and the temperature is 30 degrees C. The use of a pr...
متن کاملEffect Of Humidity And Inclination Angle On Microchannel Heat Exchanger Performance
The effect of inlet humidity conditions and inclination angle on the air side thermal hydraulic performance of a brazed aluminum heat exchanger has been investigated experimentally. The crossflow heat exchanger had flat tubes and folded fins with fin and louver pitch of 2.1 mm and 1.4 mm, respectively. The glycol temperature was held nearly isothermal at 1C, while humidity of the 12C inlet air ...
متن کاملEnhanced Design of Cross-Flow Microchannel Heat Exchanger Module for High-Performance Aircraft Gas Turbine Engines
Boiling and Two-Phase Flow Laboratory (BTPFL), Purdue University International Electronic Cooling Alliance (PUIECA), Mechanical Engineering Building, 585 Purdue Mall, West Lafayette, IN 47907; Rolls-Royce Purdue University Technology Center (UTC), Maurice Zucrow Laboratories, 500 Allison Road, Purdue University, West Lafayette, IN 47907 Enhanced Design of Cross-Flow Microchannel Heat Exchanger ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Heat Transfer Engineering
سال: 2018
ISSN: 0145-7632,1521-0537
DOI: 10.1080/01457632.2018.1496976