Exergy efficiency analysis of a flat plate solar collector using graphene based nanofluid
نویسندگان
چکیده
منابع مشابه
Exergy Analysis of Flat Plate Solar Collectors
This study proposes the concept of the local heat loss coefficient and examines the calculation method for the average heat loss coefficient and the average absorber plate temperature. It also presents an exergy analysis model of flat plate collectors, considering non-uniformity in temperature distribution along the absorber plate. The computation results agree well with experimental data. The ...
متن کاملexergy analysis of a flat plate solar collector in combination with heat pipe
the use of solar collectors in combination with heat pipes is rapidly growing in recent years.heat pipes, as heat transfer components, have undeniable advantages in comparison with other alternatives. the most important advantage is their high rate of heat transfer at minor temperature differences. although there have been numerous studies on the heat analysis or first thermodynamic analysis of...
متن کاملEnergy, economic and environmental analysis of metal oxides nanofluid for flat-plate solar collector
For a solar thermal system, increasing the heat transfer area can increase the output temperature of the system. However, this approach leads to a bigger and bulkier collector. It will then increase the cost and energy needed to manufacture the solar collector. This study is carried out to estimate the potential to design a smaller solar collector that can produce the same desired output temper...
متن کاملNanofluid-Based Direct Absorption Solar Collector
This Article is brought to you for free and open access by the Mechanical Engineering at Digital Commons @ Loyola Marymount University and Loyola Law School. It has been accepted for inclusion in Mechanical Engineering Faculty Works by an authorized administrator of Digital Commons@Loyola Marymount University and Loyola Law School. For more information, please contact [email protected]. Re...
متن کاملThe Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm
In this study, the exergy efficiency of a flat plate solar collector using Al2O3, TiO2, CuO nanoparticles and pure water as base fluid is studied. Solar radiation is selected between 200 to 600 W/m2. The method to determine optimum values of optimization variables has been developed by Genetic Algorithm Toolbox in MATLAB software. Results show by increasing solar radiation the optimized exergy ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2015
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/92/1/012015