Examination of Electropolishing Conditions for SUS304 Stainless Steel by Wiping Method Using Phosphoric Acid-Sulfuric Acid Electrolyte
نویسندگان
چکیده
Electrolyte additives, applied voltage, and wiping speed were investigated to elucidate the optimum conditions for electropolishing of stainless steel(SUS304)using a method with an electrolyte-solution-impregnated felt wiper cathode. Adding viscosity improver surfactant electrolyte solution(mixed acid 98% sulfuric 85% phosphoric acid(1 : 3, v/v))reduced evolution pits on electropolished SUS304 surfaces caused by method, but it reduced polishing rate. Conditions higher voltage lower led increased rate decreased pit surface. Electropolishing using containing 8 V 10 mm s-1 produced extremely smooth high-gloss surfaces. Analysis glow discharge optical emission spectroscopy revealed that depth profile surface composition had Cr-rich layer formed method. The pitting potential shifted more positive value after That was comparable obtained conventional electropolishing.
منابع مشابه
IMPROVING PITTING CORROSION OF 304 STAINLESS STEEL BY ELECTROPOLISHING TECHNIQUE
Several surface modification techniques such as ion implantation, surface laser melting, have been employed to improve pitting corrosion resistance of stainless steel. Electropolishing is a technique in which the surface roughness is eliminated through a selective electrochemical dissolution. The effect of electropolishing on pitting corrosion of 304 stainless steel (SS) was investigated employ...
متن کاملMild steel surface pretreatment using phosphoric acid-inhibitor solution
In this study, a new mild steel surface pretreatment solution is introduced based on phosphoric acid containing a benzimidazole derivative as inhibitor. In this way, three different benzimidazole derivatives namely benzimidazole BI, 2-methyl benzimidazole 2MBI and 2-aminobenzimidazole 2ABI were studied in the 1M H3PO4 using DC and AC electrochemical techniques. Results revealed the better corro...
متن کاملELECTROCHEMICAL BEHAVIOUR OF AISI 304 STAINLESS STEEL IN SULFURIC SOLUTION: EFFECTS OF ACID CONCENTRATION
The effects of H2SO4 concentration on the electrochemical behaviour of passive films formed on AISI 304 stainless steel were investigated using by potentiodynamic polarization, Mott–Schottky analysis and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization indicated that the corrosion potentials were found to shift towards negative direction with an increase in solution co...
متن کاملA green and eco-friendly method for the synthesis of xanthene derivatives using cellulose sulfuric acid under solvent-free conditions
A green and convenient method for the synthesis of 14-aryl-14H-dibenzo[a,i]xanthene-8,13-diones and spiro[dibenzo[a,i]-xanthene-14,3'-indoline]-2',8,13-triones in the presence of a catalytic amount of cellulose sulfuric acid (CSA) as an efficient biopolymer-based catalyst under solvent-free conditions at 100 °C is described. The condensation reactions of β-naphtol, 2-hydroxynaphthalene-1,4-dion...
متن کاملINVESTIGATION OF THE ADDITION OF METHIONINE ON THE CORROSION OF 316L STAINLESS STEEL FABRICATED BY SLM METHOD IN SULFURIC ACID MEDIA
In this study, the addition of organic methionine inhibitor (as an eco-friendly inhibitor) to 0.1 M sulfuric acid media on corrosion resistance of 316L austenitic stainless steel (fabricated by rolling method and three-dimensional (3D) printing method) was investigated. Open-circuit potential electrochemical test and impedance, and structural tests such as optical and electron microscopy and x-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2021
ISSN: ['1884-3409', '0915-1869']
DOI: https://doi.org/10.4139/sfj.72.560