Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys
نویسندگان
چکیده
منابع مشابه
Evolution of Microstructure and Physical Properties of PMMA/ MWCNTs Nanocomposites upon the Addition of Organoclay
The present investigation was carried out to evaluate the application of Cloisite 30B organoclay (C30B) on the rheological, structural, electrical, and thermal characteristics of poly (methyl methacrylate)/multiwalled carbon nanotubes nanocomposites (PMMA/MWCNTs) fabricated by the simultaneous melt mixing. The microstructure and the state of nanofllers dispersion wereassessed by melt line...
متن کاملAmbient- to Elevated-Temperature Fracture and Fatigue Properties of Mo-Si-B Alloys: Role of Microstructure
Ambientto elevated-temperature fracture and fatigue-crack growth results are presented for five MoMo3Si-Mo5SiB2–containing -Mo matrix (17 to 49 vol pct) alloys, which are compared to results for intermetallic-matrix alloys with similar compositions. By increasing the -Mo volume fraction, ductility, or microstructural coarseness, or by using a continuous -Mo matrix, it was found that improved fr...
متن کاملMicrostructures and Properties Evolution of Al-Cu-Mn Alloy with Addition of Vanadium
The effect of the vanadium addition on the microstructure, the precipitation behavior, and the mechanical properties of the Al-5.0Cu-0.4Mn alloy has been studied. The as-cast Al-5.0Cu-0.4Mn alloy was produced by squeeze casting and the heat treatment was carried out following the standard T6 treatment. It is shown that, with the addition of V, grain refinement of aluminum occurred. During heat ...
متن کاملModelling Microstructure and Properties during Annealing of Cold- rolled Al-Mn-Fe-Si-alloys with different Microchemistries
The physical basis and a mathematical formulation of a softening model nicknamed Alsoft, accounting for the combined effect of recovery and recrystallization during annealing of heavily deformed aluminium alloys have been presented. The prediction power of the model is tested against experiments in terms of softening kinetics and final grain structure of selected Al-MnFe-Si-model alloys with di...
متن کاملEffects of Bainitic Transformation Temperature on Microstructure and Tensile Properties of 0.6C-Si-Mn Steel
1 緒 言 工具や軸受,ゲ ージなどの精密部品では残留オーステ ナイ ト(rR)が存在すると硬 さや疲労寿命の低下,切 削性 不良あるいは経年形状変化を招きそれらの性質に有害な 影響をもたらす.そ れゆえ,こ れ らに使用する鋼では rRを 極力減少させ るのが好 ましい.し か しなが ら,rR が低合金構造用鋼に存在する場合には延性やじん性が向 上するとともに低温におけるぜい性破壊の防止に役立つ 場合が多い.そ れゆえ,最 近進んで熱処理によって人 為的にrRの 量や存在形態を調整 し混合組織 として優れ た機械的性質 を得ようとす る研究が しばしば見受 けら れ1)~6)る.こ のようなrRを 積極的に利用 しようとする方法 として,近 年Si-Mn鋼 をベイナイ ト変態させるオース テンパー処理が注 目されている. Si-Mn鋼 をベイナイ ト変態 させた場合多量のrRが ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research
سال: 2017
ISSN: 0884-2914,2044-5326
DOI: 10.1557/jmr.2017.239