Evolution of ice crystal microstructure during creep experiments
نویسندگان
چکیده
منابع مشابه
Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted microstructure
In-situ neutron diffraction measurements were performed on monocrystalline samples of the Ni-based superalloy CMSX-4 during N-type g0 raft formation under the tensile creep conditions of 1150 C/ 100 MPa, and subsequently on a rafted sample under the low temperature/high stress creep conditions of 715 C/825 MPa. During 1150 C/100 MPa creep, the g0 volume fraction decreased from ~70% to ~50%, the...
متن کاملCreep Deformation of Ice
Knowledge of the creep properties of ice often is needed in field and theoretical studies of the flow and deformation of glaciers, ice shelves, and ice sheets. Recently many of the icy moons in the solar system have become much better known as a result of the successful deep-space probe missions. An understanding of the physical processes that take place within them requires information about t...
متن کاملBridging simulations and experiments in microstructure evolution.
We demonstrate the importance of anisotropic interface properties in microstructure evolution by comparing computed evolved microstructures to final experimental microstructures of 5170 grains in 19 thin aluminum foil samples. This is the first time that a direct experimental validation of simulation has been performed at the level of individual grains. We observe that simulated microstructures...
متن کاملCrystal Growth Experiments of Ice in Kibo of ISS
Microgravity experiments for ice crystal growth were conducted twice in the Japan Experiment Module “Kibo” of the International Space Station. Experimental cartridges newly developed for each experiment were transported to the space station and installed in the SCOF facility. All of the experiments were possibly could be performed by using a tele-control system on the ground. Crystal patterns d...
متن کاملUltrasonic characterization of microstructure evolution during processing
Ultrasonic characterization of microstructure evolution during processing" (2007). Many cold-working processes for polycrystalline metals cause alignment of the grains with a single symmetry axis. This type of microstructure is called fiber texture. The existence of a preferred orientation of the grains has a significant influence on the propagation and scattering of ultrasonic waves, which are...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Glaciology
سال: 2007
ISSN: 0022-1430,1727-5652
DOI: 10.3189/002214307783258341