Evaporation-induced soil water flux to design suction drain for low-carbon ground stabilisation: Experimental investigation and modelling

Soil and ground water salintty and their relations to physiography

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Ocean-Atmosphere Water Flux and Evaporation

Experimental investigation of evaporation from low-contact-angle sessile droplets.

Evaporating sessile drops remain pinned at the contact line during much of the evaporation process, and leave a ring of residue on the surface upon dryout. The intensive mass loss near the contact line causes solute particles to flow to the edge of the droplet and deposit at the contact line. The high vapor diffusion gradient and the low thermal resistance of the film near the contact line are ...

Short duration and low suction pressure drain versus no drain following total knee replacement.

PURPOSE To compare the short-term outcome in patients with or without a drain (short duration and low suction pressure) following total knee replacement (TKR). METHODS A consecutive series of 106 women and 48 men (mean age, 69 years) underwent unilateral TKR. The first 77 patients used a low suction pressure (200 mm Hg) drain following TKR for 24 hours, and the next 77 patients used no drain....