Evaluations of Technologies and Products in Powder Metallurgy Processing
نویسندگان
چکیده
منابع مشابه
Powder metallurgy inspired low-temperature fabrication of high-performance stereocomplexed polylactide products with good optical transparency.
Stereocomplexation between enantiomeric poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) provides an avenue to greatly enhance performance of eco-friendly polylactide (PLA). Unfortunately, although the manufacturing of semicrystalline polymers generally involves melt processing, it is still hugely challenging to create high-performance stereocomplexed polylactide (sc-PLA) products from melt-pr...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملA Review of Nondestructive Testing Methods and Their Applicability to Powder Metallurgy Processing
The problem of forming defects in green parts during compaction and ejection has become more prevalent as parts producers have started to use higher compaction pressures in an effort to achieve high density, high performance P/M steels. In this review, several nondestructive inspection methods are evaluated, with the aim of identifying those, which are practical for detecting defects as early i...
متن کاملProcessing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملModeling and Simulation of Press and Sinter Powder Metallurgy
EFFECTIVE COMPUTER SIMULATIONS of metal powder compaction and sintering are at the top of the powder metallurgy industry’s wish list. There is much anticipated advantage to such efforts, yet there are problems that will inhibit widespread implementation. Press-sinter powder metallurgy computer simulations currently focus on the use of minimal input data to help with process setup. Although the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2009
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.56.2