Evaluations of Super-Hydrophilic Titanium Oxide Compound Fabricated by Plasma Thermal Spray Coating
نویسندگان
چکیده
منابع مشابه
Net Shape Nanostructured Aluminum Oxide Structures Fabricated by Plasma Spray Forming
The plasma spray technique has been used by several researchers to deposit nanostructured ceramic coatings, but there is no available literature discussing how to fabricate a bulk, freestanding nanostructured component by such a technique. In the current study, net shape nanostructured Al2O3 structures have been fabricated using the plasma spray technique. A detailed characterization of the spr...
متن کاملInvestigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
In this study, titanium oxide nanotubes anodized on threedifferent surface morphologies of titanium foils, were investigated. AFM imagesis used to show different surface roughness of these foils. Nanotubes wereanodized on titanium foils with 1) no polishing process (A sample), 2)electropolishing process (B sample) and 3) electropolishing process in ethanolicelectrolyte (C sample). To study the ...
متن کاملPREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
In the current research, the optimum conditions for the electrolytic deposition of TiO2 coatings on titanium pieces were experimentally investigated. Flat pieces of commercially available titanium with dimensions of 50 x20 x3 mm were used as the anode and cathode electrodes. The coatings were applied on the cathode in an electrolyte solution essentially from water and methanol, containing diffe...
متن کاملTitanium-Aluminum Oxide Coating on Aluminized Steel
In this study, a plasma electrolytic oxidation (PEO) process was used to form titanium-aluminum oxide coating on aluminized steel. The present work was mainly to study the effects of treatment time of PEO process on properties of the titanium coating. A potentiodynamic polarization corrosion test was employed to investigate the corrosion resistance of the coating. The friction coefficient and w...
متن کامل- 1 - High efficiency arrays of polymer solar cells fabricated by spray - coating in air
We present bulk heterojunction organic solar cells fabricated by spray-casting both the PEDOT:PSS hole-transport layer (HTL) and active PBDTTT-EFT:PC71BM layers in air. Devices were fabricated in a (6 x 6) array across a large-area substrate (25 cm) with each pixel having an active area of 6.45mm. We show that the film uniformity and operational homogeneity of the devices are excellent. The cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 2006
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms.126.857