Evaluation of UBM Prepared by Electroless Ni Plating Method.
نویسندگان
چکیده
منابع مشابه
Adsorption Properties of Nickel-based Magnetic Activated Carbon Prepared by Pd-free Electroless Plating
Nickel-based magnetic activated carbon was synthesized from coconut shell activated carbon by electroless plating with palladium-free activation. The effect of plating solution volume on metallic ratio and adsorption capacity were evaluated. The effect of metallic ratio on specific area, pore volume, and magnetic properties were investigated. The morphologies of activated carbon before and afte...
متن کاملEffects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel
Electroless Ni-P (EN) plating, as an important group of metallic coatings, employed in a wide range of industrial applications. The current work aims to investigate the effects of pretreatment process before EN plating on fatigue behavior of SAE 1045 steel. The specimens of rotating bending fatigue test were prepared from the steel in two series. A group of samples used in as-polished con...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملThe Root Cause of Black Pad Failure of Solder Joints with Electroless Ni/Immersion Gold Plating
This paper reports on a study of the reaction of solder with the electrolessnickel with immersion gold (ENIG) plating system, and the resulting interfacial structures. A focused-ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the ENIGplated pad with and without soldering. High-speed pull testing of solder joints was performed to expose the pad sur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Electronics Packaging
سال: 2002
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.5.75