Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
نویسندگان
چکیده
منابع مشابه
Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملCryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard
igh-temperature corrosion/oxidation has been shown to be a major contributor to the wear of tungsten carbide when machining medium density fiberboard (MDF) (Stewart 1992). Consequently, a change in the properties of the tool material to resist wear from the adverse wood machining environment needs to be investigated. A deep cryogenic treatment shows promise as a tool material treatment for incr...
متن کاملInfluence of Workpiece Material on Tool Wear Performance and Tribofilm Formation in Machining Hardened Steel
In addition to the bulk properties of a workpiece material, characteristics of the tribofilms formed as a result of workpiece material mass transfer to the friction surface play a significant role in friction control. This is especially true in cutting of hardened materials, where it is very difficult to use liquid based lubricants. To better understand wear performance and the formation of ben...
متن کاملAcoustic Emission and Vibration for Tool Wear Monitoring in Single-Point Machining Using Belief network
This paper proposes an implementation of calibrated acoustic emission (AE) and vibration techniques to monitor progressive stages of flank wear on carbide tool tips. Three cutting conditions were used on workpiece material, type EN24T, in turning operation. The root-mean-square value of AE (AErms) and the coherence function between the acceleration signals at the tool tip in the tangential and ...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refractory Metals and Hard Materials
سال: 2021
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2020.105379