Evaluation of the use of blast furnace slag as an additive in mortars

نویسندگان

چکیده

Clinker is the raw material used in manufacture of cement. However, this very harmful to environment, since it estimated that for every ton clinker produced, about 1.0 CO2 released into atmosphere. For reason, alternatives were sought use other materials are less environment. This has led industrial by-products with aim increasing their and thus reducing amount carbon Blast furnace slag a by-product some cementitious products. The research conduct study on as an additive cement or concrete. mortar samples tested according Brazilian, American European technical standards. Physical, chemical compressive strength tests carried out which confirmed possibility using without thermal activation.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

متن کامل

The Study of Ion Adsorption by Amorphous Blast Furnace Slag

In this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. For this reason, various experimental parameters such as pH, contact time and the primary ion concentration were investigated. The remaining concentrations of ions such as; Mn2+ and Fe2+ in water were measured by atomic adsorption spectroscopy. The chemical and p...

متن کامل

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

متن کامل

Use and Properties of Blast Furnace Slag as a Building Material- A Review

This paper aims at bringing a literature review on the uses and properties of popular industrial and mineral byproduct slag. At the present, most industrial slags are being used without taking full advantage of their properties or disposed rather than used. The use of slag in replacing Portland cement by GGBFS is not very common. The traditional way to utilize metallurgical slags in cementing m...

متن کامل

the study of ion adsorption by amorphous blast furnace slag

in this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. for this reason, various experimental parameters such as ph, contact time and the primary ion concentration were investigated. the remaining concentrations of ions such as; mn2+ and fe2+ in water were measured by atomic adsorption spectroscopy. the chemical and phase composition of slag, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: REM - International Engineering Journal

سال: 2022

ISSN: ['2448-167X']

DOI: https://doi.org/10.1590/0370-44672021750075