EVALUATION OF THE BUILT-UP WELD FORMED COMPONENT USING SUBMERGED ARC WELDING
نویسندگان
چکیده
منابع مشابه
Modeling of Weld Bead Geometry and Shape Relationships in Submerged Arc Welding using Developed Fluxes
To automate a welding process, which is the present trend in fabrication industry, it is essential that mathematical models have to be developed to relate the process variables to the weld bead parameters. Submerged arc welding (SAW) is characterized by its high reliability, deep penetration, smooth finish and high productivity especially for welding of pipes and boiler joints. In the present w...
متن کاملSubmerged Arc Welding: A Review
In industries and research organizations most widely used welding methods are shield metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW) and submerged arc welding (SAW). The SAW process is often preferred because it offers high production rate, high melting efficiency, ease of automation and low operator skill requirement. This review will be very helpful for...
متن کاملThermaltransport Phenomenon of Submerged Arc Welding Process
Original scientific paper In present work, thermal transport considering heat radiation by oval heat source shape and heat transfer of molten moving electrode was presented. In present paper, an analytical solution was presented by aggregating temperature increments caused by applying liquid metal and heat radiation of moving electrode. The assumptions for the study were heat source of temperat...
متن کاملParametric Optimization of Submerged Arc Welding Using L9 Orthogonal Array
Submerged arc welding process is usually employed for welding of thick workpieces. Quality of submerged arc welded components depends on various factors. Selection of appropriate process parameters for joining metallic components is needed to obtain sound weldment. Many researchers carried out investigations to find out appropriate process conditions to obtain quality submerged arc welded compo...
متن کاملPrediction of the Effect of Submerged Arc Welding Process Parameters on Weld Bead Width for MS 1018 Steel
The present investigation uses arc voltages, current, welding speed, wires feed rate and nozzle-to-plate distance as process parameters. Two level full factorial a technique has been used for experiment design. Multiple regression analysis has been used to develop a mathematical model to predict weld width using a single wire Submerged arc welding depositing bead-on-plate welds on 12mm plate. A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Port-Said Engineering Research Journal
سال: 2013
ISSN: 2536-9377
DOI: 10.21608/pserj.2013.39789