Evaluation of tensile strength in riveted, adhesive and hybrid joints
نویسندگان
چکیده
منابع مشابه
Residual Strength Analyses of Riveted Lap-Splice Joints
Aging aircraft may develop multiple-site damage (MSD) that can reduce the structural integrity of fuselage structures. The existence of small cracks emanating from adjacent rivet holes in a fuselage lap-splice joint is of major concern. Small collinear cracks greatly reduce the residual strength of a panel with a lead crack. Recent studies predicting the residual strength of flat and curvilinea...
متن کاملFatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions
Fatigue strength of cross-shaped specimens of SPR joints made of SPCC was evaluated at load angles of 0°, 45°, and 90°. For the static strength at load angles of 0°, 45°, and 90°, the maximum loads were determined to be 4890N, 1969N, and 1611N, respectively. Regarding for the relationship between the load amplitude and the number of cycles (Nf), the results were 014 . 0 3 . 2209 − = f amp N P ,...
متن کاملThe Effects of Adding Attachments in Conventional Composite Hybrid Joints on Tensile Strength
.................................................................................................................... 2 INTRODUCTION ............................................................................................................. 4 STATEMENT OF THE PROBLEM .................................................................................. 5 SIGNIFICANCE OF THE PROBLEM ..................
متن کاملDesigning for Manufacturability in Riveted Joints
The study of human experts in the areas of design and manufacturing has lead to two hypotheses concerning the problem solving methods which these engineers utilize to attack difficult problems. The basis of both hypotheses is a modular approach to problem solving. One hypothesis addresses the nature of the modules utilized while the other hypothesis deals with the organization of the modules. A...
متن کاملInvestigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites
Polymer-based nanocomposites due to their advantages such as corrosion resistance,adequate mechanical properties and low cost are widely used in modern technologies. The increasing application of these nanocomposites, and hence their welding seems unavoidable. In this paper, a novel hottool in friction stir welding process is used for butt welding nanocomposite plates of 5 mm thick containing p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/998/1/012042