Evaluation of Surface Residual Stresses in Cold-Rolled 5083 Aluminum Alloy by X-ray Method
نویسندگان
چکیده
منابع مشابه
Effect of geometrical variable and welding sequence on residual stresses and deformation in a 5083-H321 aluminum T joint
Studies on welding process of Aluminium weldments shows that post-weld residual stress and deformation are influential on structure efficiency and there are different variable which affect these stresses and deformation. In this study the effect of geometrical variables and welding sequence on residual stresses and deformation in Aluminium H321 have investigated by the finite element software A...
متن کاملEffect of geometrical variable and welding sequence on residual stresses and deformation in a 5083-H321 aluminum T joint
Studies on welding process of Aluminium weldments shows that post-weld residual stress and deformation are influential on structure efficiency and there are different variable which affect these stresses and deformation. In this study the effect of geometrical variables and welding sequence on residual stresses and deformation in Aluminium H321 have investigated by the finite element software A...
متن کاملInfluence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi’s Techniques
In this paper, the straight flute end-milling cutter used for machining of Al-Si-Mg-Fe alloy work pieces was investigated. The machining processes could induce residual stresses that enhance greatly the performance of the machined component. Machining residual stresses correlate very closely with the cutting parameters. In the experiments, the residual stress on the surface of workpiece was mea...
متن کاملEVALUATION OFDISLOCATION STRUCTURE AND CRYSTALLITE SIZE IN WORN AL-SI ALLOY BY X-RAY DIFFRACTION
Abstract: powerful method for the characterization of microstructures of crystalline materials in terms of crystallite size anddislocation structures. In this paper the effect of the sliding on the microstructure of A356 in the as-cast and heattreated conditions are studied, The X-ray phase analysis shows that with increasing applied load, the dislocationdensity is increased, whereas the crysta...
متن کاملFatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
This study examines the fatigue and anisotropy behaviour of cold rolled AA1200 aluminium alloy for light weight automotive connecting rod application. Aluminium (Al) 1200 ingots were melted at temperature of 680 0C (after one hour of heating) cast in sand mould and cast samples homogenized for 6 hrs at 480 0C. The cold rolling process was carried out after homogenisation for 10, 20, 30, 40 and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1993
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.34.496