Evaluation of stress intensity factor for small edge interface crack under thermal stress
نویسندگان
چکیده
منابع مشابه
Accurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method
This paper presents the simple method to determine the complex stress intensity factor of interface crack problem by the finite element method. The proportional method is extended to the interface crack problem. In the present method, the stress values at the crack tip calculated by FEM are used and the stress intensity factors of interface crack are evaluated from the ratio of stress values be...
متن کاملCalculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress
In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...
متن کاملCrack propagation and fracture in silicon wafers under thermal stress
The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a cr...
متن کاملStress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method
This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack. It is assumed that the cracks are located radially at center, internal or external radius of the geometry. Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...
متن کاملThreshold stress intensity factor and crack growth rate prediction under mixed-mode loading
A new mixed-mode threshold stress intensity factor is developed using a critical plane-based multiaxial fatigue theory and the Kitagawa diagram. The proposed method is a nominal approach since the fatigue damage is evaluated using remote stresses acting on a cracked component rather than stresses near the crack tip. An equivalent stress intensity factor defined on the critical plane is proposed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the JSME (in Japanese)
سال: 2015
ISSN: 2187-9761
DOI: 10.1299/transjsme.15-00045