EVALUATION OF STAINLESS STEEL 316L JOINTS WELDED BY LASER
نویسندگان
چکیده
منابع مشابه
Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملevaluation of microstructure and mechanical properties of friction stir welded copper / 316l stainless steel dissimilar metals
in the present research, friction stir welding (fsw) process was used for butt joining of pure copper plate to 316l stainless steel plate. mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (sem). it was found that microstructure of the weld nugget (wn) has fine grains where...
متن کاملCreep Deformation Measurement of 316H Stainless Steel Multi-pass Welded Joints using Digital Image Correlation
A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...
متن کاملStudy of Microstracture and Microhardness of Welded Austenic Stainless Steel 316L by TIG, A-TIG and FB-TIG Methods.
In this study the effect of activating fluxes on the penetration depth, microstructure and microhardness of AISI316L austenitic stainless steel were evaluated by three TIG process variations (TIG, A-TIG and FB-TIG) and the results were compared together.. After selecting the optimal flux in the second stage, the effect of that on the penetration depth, microstructure and weld microhardness of ...
متن کاملElectrochemical polishing of 316L stainless steel slotted tube coronary stents.
Surface smoothness is one of the properties determining the performance of stents. Therefore, surface polishing shows its importance in the exploitation and production of stents. The present study explores electrochemical polishing of 316L stainless steel slotted tube coronary stents produced by laser cutting. Acid pickling was also studied as a pre-treatment of electrochemical polishing of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Al-Azhar University Engineering Sector
سال: 2019
ISSN: 1687-8418
DOI: 10.21608/auej.2019.28514