Evaluation of sand-clay-anionic polyacrylamide blends for alternative compacted clay landfill liner design

low-amplitude dynamic properties for compacted sand-clay mixtures

shear modulus and damping ratio are important input parameters in dynamic analysis. a series of resonant column tests was carried out on pure clays and sand-clay mixtures prepared at different densities to investigate the effects of aggregate content, confining stress, void ratio and clay plasticity on the maximum shear modulus and minimum damping ratio. test results revealed an increase in the...

Permeability Characteristics of Compacted and Stabilized Clay with Cement, Peat Ash and Silica Sand

The present paper investigates the influence of stabilization with cement, peat ash, and silica sand on permeability coefficient (kv) of compacted clay, using a novel approach to stabilize the clay with peat ash as a supplementary material of cement in the compacted and stabilized soil. In order to assess the mentioned influence, test specimens of both untreated and stabilized soil have been te...

post-cyclic behavior of compacted clay-sand mixtures

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

Mechanical interaction between swelling compacted clay and fractured rock, and the leaching of clay colloids

We consider the interaction between a saturated clay buffer layer and a fractured crystalline rock engineered disturbed zone. Once saturated, the clay extrudes into the available rock fractures, behaving as a compressible nonNewtonian fluid. We discuss the modelling implications of published experiments carried out in Sweden and more recently in Japan. Extrusion is halted either when the advanc...

Continuous Tangible Interfaces: Bringing Clay and Sand into Digital Design