Evaluation of post-earthquake loading capacity of steel reinforced retaining wall by displacement and/or loading controlled pullout test

Reinforced Concrete Wall Response under Uni- and Bi- Directional Loading

During an earthquake, structures are subjected to both horizontal and vertical shaking. Most structures are rather insensitive to variations in the vertical acceleration history and primary considerations are given to the impact of the horizontal shaking on the behavior of structures. In the laboratory, however, most component tests are carried out under uni-directional horizontal loading to si...

Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading

Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...

Simplified Procedure to Evaluate Earthquake-induced Residual Displacement of Geosynthetic Reinforced Soil Retaining Walls

Based on a series of shaking table model tests, it was found that the eŠects of 1) subsoil and backˆll deformation, 2) failure plane formation in backˆll, and 3) pullout resistance mobilized by the reinforcements on the seismic behaviors of the geosynthetic reinforced soil retaining walls (GRS walls) were signiˆcant. These eŠects cannot be taken into account in the conventional pseudo-static ba...

Evaluation of the fabric formability by concentrated loading method

Predicting the buckling Capacity of Steel Cylindrical Shells with Rectangular Stringers under Axial Loading by using Artificial Neural Networks

A parametric study was carried out in order to investigate the buckling capacity of the vertically stiffened cylindrical shells. To this end ANSYS software was used. Cylindrical steel shells with different yield stresses, diameter-to-thickness ratios (D/t) and number of stiffeners were modeled and their buckling capacities were calculated by displacement control nonlinear static analysis.  Radi...