Evaluation of novel 3D-printed monolithic adsorbers against conventional chromatography columns for the purification of c-phycocyanin from Spirulina
نویسندگان
چکیده
Extraction and purification of high-grade phycobiliproteins is a multistep process that typically involves costly chromatographic separation techniques. 3D printing approaches materials can now be tailored to fabricate low-cost anion exchange monolithic adsorbers for chromatography. In this work, new formulation was used produce discs with quaternary amine functionality. The 3D-printed were tested the c-phycocyanin allophycocyanin from extracts cyanobacterium Arthrospira platensis (Spirulina). Analytical grade 41 ± 7% recovery obtained in single step. also demonstrated similar or higher properties when compared commercial Q-Sepharose discs. Reproducibility tests showed fabrication robust potentially scalable industry-scale purification. Overall, operative flexibility, robustness performance promising potential wide range biomolecules.
منابع مشابه
Optimization,Purification and characterization of Phycocyanin from Spirulina platensis
A method for stably purifying a functional dye, phycocyanin from Spirulina platensis was developed by freezing and thawing method. Among various buffers used for phycocyanin yield efficiency sodium phosphate buffer (pH 7 and 0.1 M) was found to be most suitable for highest yield. During comparison of various buffers, sodium phosphate buffer was found as best buffer with 146 ±0.265 mg/g phycobil...
متن کاملExtraction and Purification of C-phycocyanin from Spirulina platensis in Conventional and Integrated Aqueous Two-Phase Systems
Extrato aquoso de C-ficocianina de Spirulina platensis, com e sem resíduos celulares, foi purificado em sistema aquoso bifásico (SAB) polietilenoglicol (PEG)/fosfato de potássio variando-se a massa molar do PEG, a pH 6, mais promissor do que a pH 7. Para os ensaios realizados com cada massa molar, com diferentes percentuais de PEG e sal, as concentrações (mg mL), as purezas (OD 620/OD 280) e os...
متن کاملa study on thermodynamic models for simulation of 1,3 butadiene purification columns
attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...
3D printed metal columns for capillary liquid chromatography.
Coiled planar capillary chromatography columns (0.9 mm I.D. × 60 cm L) were 3D printed in stainless steel (316L), and titanium (Ti-6Al-4V) alloys (external dimensions of ~5 × 30 × 58 mm), and either slurry packed with various sized reversed-phase octadecylsilica particles, or filled with an in situ prepared methacrylate based monolith. Coiled printed columns were coupled directly with 30 × 30 m...
متن کاملPurification of C-phycocyanin from Spirulina platensis in Aqueous Two-Phase Systems using an Experimental Design
C-phycocyanin from Spirulina platensis was purified in aqueous two-phase systems (ATPS) of polyethylene glycol (PEG)/potassium phosphate, varying the molar mass of the PEG. Results using a full factorial design showed that an increase in the concentration of salt and decrease in the concentration of PEG caused an increment in the purification factor for all the ATPS studied. Optimization of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Algal Research-Biomass Biofuels and Bioproducts
سال: 2021
ISSN: ['2211-9264']
DOI: https://doi.org/10.1016/j.algal.2021.102253