Evaluation of nitrogen content on pitting and repassivation behavior of a high alloy nickel‐reduced austenitic stainless steel
نویسندگان
چکیده
The present study deals with the pitting and repassivation behavior of a nickel-reduced austenitic stainless steel different nitrogen contents. While promoted resistance to pitting, no significant effect on was found. also aims address experimental difficulties in determining potentials owing occurrence crevice corrosion. Furthermore, mechanism ongoing reactions investigated, indicating that initiated regions where manganese sulfide inclusions were next remaining δ-ferrite.
منابع مشابه
An investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel
In the present work the effects of plasma nitridization on the passivation behavior of AISI 316L was investigated. To do this; nitriding treatments were carried out at 420°C for 1, 2, 4 and 16 hours. The phase composition and structure of the nitrided layer were studied by Low Angle X-ray diffraction and Scanning Electron Microscopy. The hardness of samples also was evaluated by Vickers microha...
متن کاملSensitization Behavior of Gnaw Austenitic Stainless Steel Joints
The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...
متن کاملAn evaluation of weld metal nitrogen retention and properties in 316LN austenitic stainless steel
A series of tests were conducted using varying levels of nitrogen and helium in a conventional argon shielding gas when welding 316LN austenitic stainless steel. The outcome was that a 15 per cent nitrogen addition to the argon shielding gas had the most significant effect on increasing the weld metal nitrogen. Subsequent additions of helium to the argon 15 per cent nitrogen shielding gas had v...
متن کاملFatigue behavior of Austenitic Type 316L Stainless Steel
The aim of this work is to determine the fatigue life of 316L stainless steel. The mechanisms of fatigue of 316L stainless steels were investigated and discussed. The fatigue tests were carried out at constant-amplitude cyclic loading with load ratio R=0.1. Scanning Electron Microscope (SEM) is then used to examine the fracture surface. The results show that the fatigue limit of 316L stainless ...
متن کاملan investigation on the passivation behavior of nitrogen enriched aisi 316l austenitic stainless steel
in the present work the effects of plasma nitridization on the passivation behavior of aisi 316l was investigated. to do this; nitriding treatments were carried out at 420°c for 1, 2, 4 and 16 hours. the phase composition and structure of the nitrided layer were studied by low angle x-ray diffraction and scanning electron microscopy. the hardness of samples also was evaluated by vickers microha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials and Corrosion-werkstoffe Und Korrosion
سال: 2022
ISSN: ['0947-5117', '0043-2822', '1521-4176']
DOI: https://doi.org/10.1002/maco.202213236