Evaluation of marginal accuracy of nickel chromium copings fabricated from three different fabrication techniques: an in vitro study
نویسندگان
چکیده
The purpose of the study was to compare marginal accuracy Ni-Cr copings made by four different pattern forming methods, using inlay casting wax and resin in conventional manner, patterns CAD & milling a 3 dimensional printing (3DP) technology total 40 test samples cast were out 10 each group wax, resin, from 3D technology. Each coping seated on stainless steel die evaluated for both vertical horizontal gaps translating tool makers microscope. gap data analyzed use Kruskal Wallis Test followed Mann Whitney U ANOVA Tukey honestly significantly (HSD) tests. printed showed better results adaptability. fit fabricated prepared clinically acceptable range longevity restorations.
منابع مشابه
Marginal accuracy of nickel chromium copings fabricated by conventional and accelerated casting procedures, produced with ringless and metal ring investment procedures: A comparative in vitro study.
BACKGROUND Conventional investing and casting techniques are time-consuming and usually requires 2-4 h for completion. Accelerated nonstandard, casting techniques have been reported to achieve similar quality results in significantly less time, namely, in 30-40 min. During casting, it is essential to achieve compensation for the shrinkage of solidifying alloy by investment expansion. The metal ...
متن کاملan investigation of accuracy and complexity across different proficiency levels in written narrative task
abstract this quasi-experimental study was aimed at examining the impact of storyline complexity on the grammatical accuracy and complexity of advanced and intermediate efl learners. a total of 65 advanced and intermediate efl learners were selected from iran language institute (ili). an intact group including 35 intermediate participants and another intact group with 30 advanced participants ...
Evaluation of marginal fit and internal adaptation of zirconia copings fabricated by two CAD - CAM systems: An in vitro study
STATEMENT OF PROBLEM Three main factors which determine the success of an All-ceramic restoration are esthetic value, resistance to fracture and third being the marginal fit. Marginal fit and internal adaptation are crucial factors in increasing the longevity of the restoration. Newer and economical CAD CAM systems have been introduced claiming better marginal fit and adaptation of All ceramic ...
متن کاملMarginal discrepancy and microleakage in crown-copings fabricated by three CAD/CAM systems: An in vitro study
The purpose of this study was to evaluate and compare the microleakage and marginal discrepancy of ceramic crown-copings fabricated by three different CAD/CAM systems. Material and methods: Thirty extracted premolars were prepared for complete allceramic crowns with: total convergence 10-degree, 2 mm occlusal reduction, 4.5 mm height, 1.3 mm circular reduction and chamfer marginal preparation. ...
متن کاملThe fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study.
OBJECTIVES This study sought to evaluate and compare the marginal and internal fit in vitro of three-unit FDPs in Co-Cr made using four fabrication techniques, and to conclude in which area the largest misfit is present. METHODS An epoxy resin master model was produced. The impression was first made with silicone, and master and working models were then produced. A total of 32 three-unit Co-C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IP Annals of prosthodontics and restorative dentistry
سال: 2023
ISSN: ['2581-4796']
DOI: https://doi.org/10.18231/j.aprd.2023.022