Evaluation of Hafnium-Titanium-Oxide Thin Films Prepared by Reactive Sputtering.
نویسندگان
چکیده
منابع مشابه
Electrical resistivity of copper oxide thin films prepared by reactive magnetron sputtering
Purpose: Investigation the effect of varying r.f. power and oxygen flow rates during deposition on the electrical properties of copper oxide thin films prepared by reactive magnetron sputtering Design/methodology/approach: The films were characterised by AFM, XPS, four point electrical resistivity probe measurements and spectrophotometry. Findings: The electrical sheet resistance of the films w...
متن کاملSurface Properties of Nanostructured, Porous ZnO Thin Films Prepared by Direct Current Reactive Magnetron Sputtering
In this paper, the results of detailed X-ray photoelectron spectroscopy (XPS) studies combined with atomic force microscopy (AFM) investigation concerning the local surface chemistry and morphology of nanostructured ZnO thin films are presented. They have been deposited by direct current (DC) reactive magnetron sputtering under variable absolute Ar/O₂ flows (in sccm): 3:0.3; 8:0.8; 10:1; 15:1.5...
متن کاملNanocharacterization of titanium nitride thin films obtained by reactive magnetron sputtering
Titanium nitride thin films are used in applications such as tribological layers for cutting tools, coating of some medical devices (scalpel blades, prosthesis, implants etc.), sensors, electrodes for bioelectronics, microelectronics, diffusion barrier, bio-microelectromechanical systems (Bio-MEMS) and so on. This work is a comparative study concerning the influence of substrate temperature on ...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 2002
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.45.18