Evaluation of gear pitting severity by using various condition monitoring indicators

Condition Monitoring of Gear Systems Using Vibration Analysis

It is often impractical to measure vibrations directly at /or close to their sources when condition monitoring gearbox systems. It is common to measure the vibration distant from the source due to limited access to the component which is to be monitored. In addition, operating the gearbox under different loads and speeds also produces vibration signals within different components. Vibration mea...

Remotely Gear Condition Monitoring Using Traditional Signal Processing Techniques

The University Repository is a digital collection of the research output of the University, available on Open Access. Copyright and Moral Rights for the items on this site are retained by the individual author and/or other copyright owners. Users may access full items free of charge; copies of full text items generally can be reproduced, displayed or performed and given to third parties in any ...

Investigation of Condition Indicators, Operational Conditions and Gear Health State Using Data Mining Techniques

Damage progression tests were performed in the NASA Glenn Spiral Bevel Gear Fatigue Rig. Six gear sets with varying levels of tooth damage were tested, and vibration-based gear condition indicators, amount of debris generated, and oil temperatures were measured. The damage state was documented with photographs taken at inspection intervals throughout the test and was quantified with a numerical...

Pitting Corrosion Monitoring Using Acoustic Emission

Availability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval

Maintenance helps to extend equipment life by improving its condition and avoiding catastrophic failures. Appropriate model or mechanism is, thus, needed to quantify system availability vis-a-vis a given maintenance strategy, which will assist in decision-making for optimal utilization of maintenance resources. This paper deals with semi-Markov process (SMP) modeling for steady state availabili...