Evaluation of fracture toughness for ceramic materials.
نویسندگان
چکیده
منابع مشابه
On the fracture toughness of ferroelastic materials
The toughness enhancement due to domain switching near a steadily growing crack in a ferroelastic material is analyzed. The constitutive response of the material is taken to be characteristic of a polycrystalline sample assembled from randomly oriented tetragonal single crystal grains. The constitutive law accounts for the strain saturation, asymmetry in tension versus compression, Bauschinger ...
متن کاملOn the Fracture Toughness of Advanced Materials
S E On the Fracture Toughness of Advanced Materials A R C H By Maximilien E. Launey, and Robert O. Ritchie* N E W S Few engineering materials are limited by their strength; rather they are limited by their resistance to fracture or fracture toughness. It is not by accident that most critical structures, such as bridges, ships, nuclear pressure vessels and so forth, are manufactured from materia...
متن کاملEvaluation of in situ fracture toughness of ceramic coatings at elevated temperature by AE inverse analysis
This paper describes acoustic emission (AE) measurement at elevated temperature by laser techniques. AE signals originated from microfracture of Al2O3/SUS304 plasma sprayed coatings were detected using a laser interferometer during thermal cycling. The radii of microcracks were evaluated by the inverse analysis of AE signals. Microcrack radii were also studied by the numerical analysis based on...
متن کاملEvaluation of contemporary ceramic materials.
The last 25 years have witnessed the introduction of a bewildering number of ceramic systems to the dental profession. Most of these systems have been introduced with little or no clinical testing. Laboratory studies of physical and mechanical properties of ceramics provide little predictive information regarding likely clinical survival rates. Early adopters of many of these new systems learne...
متن کاملStrength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics.
OBJECTIVE The present study is the second part of an investigation of strength, fracture toughness and microstructure of nine all-ceramic materials. In the present study, DC Zirkon, an experimental yttria partially stabilized zirconia, In-Ceram Zirconia slip and In-Ceram Zirconia dry-pressed were compared. METHODS Strength was appraised on ten bar-shaped specimens for each material (20 x 4 x ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1989
ISSN: 0915-1559
DOI: 10.2355/isijinternational.29.717