Evaluation of a Direct Granulation Method for Liquid Materials with a Fluidized Bed Granulator [Translated]^†

Granulation of Urea in a Pan Granulator

Urea granulation is favored over prilling due to the problems associated with prilling. Tumbling agglomeration technique is employed in pan granulator. Product with wide size range can be produced by playing with only few parameters like binders (water and urea solution), ratio of binders, rpm of pan, granulation time and angle of inclination. Urea granulation is studied at laboratory scale usi...

Granulation Time in Fluidized Bed Granulators

Size enlargement of fine powders by wet granulation involves mixing of fine particles with a binder liquid to form larger wet granules and drying them by evaporation of the binder liquid to form larger dry granules. Identification of the time for completion of granulation process is critical as further mixing of dry granules is providing extra energy for their attrition. In a batch fluidized be...

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Mechanism of particle coating granulation with RESS process in a fluidized bed

Ž . In this study, the rapid expansion of supercritical fluid solution RESS process was employed for the coating granulation of fine particles in a fluidized bed and its mechanism was examined. The rapid expansion of the supercritical solution causes very high supersaturating ratio of solute in the spraying flow, forming a large number of superfine nuclei. The superfine nuclei deposited on the ...

Effect of Process Variables on Growth Kinetics of Lactose Particles in a Wet Spray Fluidized Bed Granulator