EVALUATION FOR POWDER COATING ON ALUMINUM ALLOY BUILDING MATERIALS
نویسندگان
چکیده
منابع مشابه
Acid aluminum phosphate for the binding and coating of materials
This is a review of acid aluminum phosphate for the binding and coating of materials. The acid aluminum phosphate in the form of a solution obtained by dissolving aluminum hydroxide in phosphoric acid, with a P/Al molar ratio of 23, is effective for the binding of fibrous or particulate materials. Porous ceramic articles are made using this binder by wet forming, followed by heat treatment. The...
متن کاملAccelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملMechanical evaluation of aluminum alloy ring fixator.
OBJECTIVE To test the homemade ring fixator as a tool for correction of bony deformity. MATERIAL AND METHOD The authors developed an aluminum alloy ring fixator and tested it to find out the accuracy of manufacturing and strength of the ring systems under axial load with the Roundness Testing Machine and Lloyd Universal Testing Machine. RESULTS The mean diameter of the twenty five-drill hol...
متن کاملDirect Electrosynthesis of Polyaniline–Fe2O3 Nanocomposite Coating on Aluminum Alloy 5052 and Its Corrosion Protection Performance
The synthesis of polyaniline- Fe2O3 nanocomposite coating on aluminum Alloy 5052 (AA5052) surface has been investigated by using the galvanostatic method. The anticorrosion performance of polyaniline-Fe2O3 coating was investigated in 3.5% NaCl solution by the open- circuit potential (OCP), Tafel polarization technique and Electrochemical Impedance Spectroscopy (EIS). The corrosion rate of polya...
متن کاملBiocompatibility of a titanium–aluminum nitride film coating on a dental alloy
The purpose of this investigation was to develop a coating technique and to study the characteristics of titanium–aluminum nitride [(Ti,Al)N] films deposited on a base-metal alloy (Wiron88R) substrate. Titanium–aluminum nitride thin films were deposited on the alloy surface using a reactive radiofrequency sputtering method. The electrochemical properties of three specimens with and without coat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2012
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.77.1839